Pressure transmitter Pressure transmitter
Output signal: 0-10 Volt (3-wire)
Accuracy class: 0.5%
Our pressure transmitter DT1 is available with an analog output signal 4-20 mA or 0-10 Volt.
This universally applicable pressure transmitter (IP65) with an accuracy of 0.5% can be used for the most liquids and gases are used. Areas of application are e.g. in hydraulics, Pneumatics, plant and mechanical engineering and general industrial applications.
The pressure range extends from 100 mbar up to 600 bar, as well as in the vacuum range.
Our pressure transmitters are optionally available with special connections, such as
Cooling fins for a use temperature up to 150°C
Differential pressure, diaphragm seal, as well as clamp and flange connections.
Properties:
Design against frequency interference
Long-term stability and high precision
Reverse polarity protection and current limiting protection
|
Overload limit |
150% |
|
Accuracy |
0,5%FS |
|
Operating temperatur |
-20 - 80°C |
|
Compensation temperature |
10 ~ 70°C |
|
Long-term stability |
Typical: ±0.2%FS/ year |
|
Temperature error |
Typical: ±0.02%FS/°C, Max: ±0.05%FS/°C |
|
Electrical protection |
EN61326 |
|
Sampling rate |
2 ms |
|
Measuring medium |
Gas, water, oil
and the VA alloys do not attack and are not highly viscous |
|
Connection |
Standard G1/4 "or G1/2" according to EN 837-1
on request: M10x1, 1/4NPT, 1/2NPT, M20x1.5
Flush diaphragm, clamp, flange, differential, cooling fins |
|
Connection material |
304 stainless steel (corresponds to 1.4301, V2A) |
|
Case |
304 stainless steel (corresponds to 1.4301, V2A) |
|
Sensor |
304 stainless steel (corresponds to 1.4301, V2A) |
|
Seal |
< 60bar NBR, >/= 60bar FKM |
|
Supply |
12-28 Volt |
|
Connection |
4-20mA 2-wire
0-10 Volt 3-wire |
|
Weight |
0,16Kg |
Other versions on request:
Special measuring ranges, flush-mounted diaphragm,
Special process connections eg. 1 / 4NPT, M20x1.5 ...,
other signal outputs eg. 0-5V ...
Product safety information
| Shipping weight: |
0,25 kg
|
| Item weight: |
0,20 kg
|
