Pressure transmitter cl.0,5% 4-20mA G1/2" 0-250 mbar

Pressure transmitter cl.0,5% 4-20mA G1/2" 0-250 mbar

(1 Reviews)

SKU: DT1-057
GTIN: 7425751431997
Category: Pressure transmitter

Pressure transmitter
Output signal: 4-20mA (two-wire)
Power supply: 12 - 28 V DC, angled plug DIN 43560 / EN 175301-803 (size 3, 4-pin)
Temperature range: Medium temperature: -20 °C to + 80 °C
Accuracy class: ± 0.5%
Temperature error: Typical: ± 0.02% / °C, Max ± 0.05% / °C
Overload protection: 150%
Measuring frequency: = 2ms
Protection class: IP65
Connection: G1/4"or G1/2" according to EN 831

Connection
Measuring range

74,95 €

Show net prices

incl. 19% VAT , plus

8 In stock
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Pressure transmitter Pressure transmitter
Output signal: 4-20mA (two-wire)
Accuracy class: 0.5%

Our pressure transmitter DT1 is available with an analog output signal 4-20 mA or 0-10 Volt.

This universally applicable pressure transmitter (IP65) with an accuracy of 0.5% can be used for the most liquids and gases are used. Areas of application are e.g. in hydraulics, Pneumatics, plant and mechanical engineering and general industrial applications.
The pressure range extends from 100 mbar up to 600 bar, as well as in the vacuum range.

Our pressure transmitters are optionally available with special connections, such as
Cooling fins for a use temperature up to 150°C
Differential pressure, diaphragm seal, as well as clamp and flange connections.

Properties:
Design against frequency interference
Long-term stability and high precision
Reverse polarity protection and current limiting protection

Overload limit	150%
Accuracy	0,5%FS
Operating temperatur	-20 - 80°C
Compensation temperature	10 ~ 70°C
Long-term stability	Typical: ±0.2%FS/ year
Temperature error	Typical: ±0.02%FS/°C, Max: ±0.05%FS/°C
Electrical protection	EN61326
Sampling rate	2 ms
Measuring medium	Gas, water, oil and the VA alloys do not attack and are not highly viscous
Connection	Standard G1/4 "or G1/2" according to EN 837-1 on request: M10x1, 1/4NPT, 1/2NPT, M20x1.5 Flush diaphragm, clamp, flange, differential, cooling fins
Connection material	304 stainless steel (corresponds to 1.4301, V2A)
Case	304 stainless steel (corresponds to 1.4301, V2A)
Sensor	304 stainless steel (corresponds to 1.4301, V2A)
Seal	< 60bar NBR, >/= 60bar FKM
Supply	12-28 Volt
Connection	4-20mA 2-wire 0-10 Volt 3-wire
Weight	0,16Kg

Other versions on request:
Special measuring ranges, flush-mounted diaphragm,
Special process connections eg. 1 / 4NPT, M20x1.5 ...,
other signal outputs eg. 0-5V ...