The Digi-K80 is a digital stainless steel contact pressure gauge.
Due to the high accuracy and the advantages of a digital manometer the device offers the best conditions to replace a mechanical contact manometer. It fully complies with the wiring of a mechanical contact gauge
It is particularly suitable for occasions with frequent pressure surges and strong vibrations on site.
The four-digit LED display can be easily read from a distance.
The manometer is provided with a 5-pin waterproof connector and a cable
Measuring ranges from 5 kPa up to 1,000 bar are available, as well as the most common connections.
For the power supply you can choose between 3 variants,
24V DC, 220V AC and 380V AC. Up to 5A (3A at 380V) you can use the relays directly, at a higher load use a contactor or an intermediate relay.
There are 2 relays installed in the device, which can be used together or separately. With low-pressure set the lower pressure range and with
High-pressure set the upper pressure range to be controlled.
In addition, a delta-P with Add1 and Add2 can be set to keep the contact.
The contacts are opener and closer NO/NC (change contact)
Product weight: | 0,50 Kg |