Digital manometer with data logger
The measured value storage rate can be set: every 10 ms / 100 ms / 1 sec / 10 sec.
A data record can also be created at the “push of a button” (“REC” button).
Technical specifications:
Pressure connection G 1/2 B stainless steel 1.4301
Accuracy ± 0.5% F.S.
including factory calibration certificate
including protective rubber cap
Lithium Ion Battery
20 hours of continuous use
with USB interface and integrated 8 GB data memory
(Output as CSV file, no software required)
Pressure units (selectable): mbar, bar, PSI, kPa, MPa
LC display including bar graph, MIN/MAX peak. Delivery: Built-in rechargeable Li-ion battery
Pressure connection: 1/2"BSP floor according to EN 837
| Interface: | USB |
| Ambient temperature: | -10 ... + 50 ° C |
| Storage temperature: | -20 ... + 60 ° C |
| Medium temperature: | -40 ... + 125 ° C |
| Maximum relative room humidity: | 85% r.h. |
| Material pressure connection: | Stainless steel 1.4301 |
| Material membrane: | Stainless steel 1.4301 |
| Material seal: | No seal because of the welded stainless steel membrane |
| Temperature compensated area: | 0 ... 50 ° C |
| Error in the temperature compensated area: | ≤0.035% FS / ° C |
| Minimum load cycles: | 100 million |
| Care: | Lithium-ion battery |
| Max. Battery life: | 20 hours of continuous operation |
| Pressure units: | bar, PSI, kPa, MPa |
| Pressure connection: | G 1/2 B according to EN 837 |
| Display: | LCD including bar graph |
| Peak value memory: | Min. / Max. |
| Weight: | approx. 410 g |
| Case diameter: | approx. 80 mm |
| Housing diameter with protective rubber cap: | approx. 95-100 mm |
| Product weight: | 0,41 Kg |